|
Energy Doctor >
Products >
Energy Doctor’s PowerMax 1200
Energy efficiency is a commitment worth
making, especially with today’s global climate change. Become more
earth friendly, while reaping the financial savings from using the
PowerMax 1200!
Energy Doctor’s
PowerMax 1200
Is an electromagnetic control
system that reduces the amount of non-productive current in your
existing electrical system. It helps to significantly reduce
electrical costs and pollution from energy generated by the utility
companies.
The PowerMax 1200 will reduce demand at the meter by reducing lost
and wasted power, plus it will reduce maintenance costs and increase
equipment life by reducing heat around the motor and wiring caused
by reactive current.
Discover the savings that thousands of satisfied customers are
enjoying.
How
our PowerMax 1200, manufactured by KVAR Energy Savings Inc., works:
- The PowerMax 1200
is an apparatus and methodology for determining, to an exact
science, the amount of capacitance that is needed to optimize
inductive motors to unity for maximum savings.
-
The
PowerMax 1200 fine tunes the electrical system from the
inductive equipment back through the utility company’s KVA
electric meter, kilowatt hour meter (kWh) or demand meter. This
fine tuning slows down the operation and therefore reduces
electrical consumption.
-
The
PowerMax 1200 stores the reactive power to create the
electromagnetic field (EMF) around the inductive windings of a
motor.
-
As
motors operate, reactive power is “pulled” and “pushed” to and
from the PowerMax 1200 by the motor at 60 cycles/second.
-
The
PowerMax 1200 stores and releases what the motors need to
function more efficiently.
-
This
unique approach serves to reduce the heat generated on the lines
and therefore also reduces the strain placed on all the
electrical components.
-
Electricity that would normally be pushed back through the power
distribution lines, is reclaimed and recycled by the PowerMax
1200.
-
The
PowerMax 1200 reclaims, stores, recycles and supplies power to
all inductive loads.
Save up
to 25% on your electrical bill
Installation is quick and the
savings immediate
The PowerMax 1200 panel
mounted system is attached to the top breaker on a 100, 200 or 400
amp single or three phase service panel. By installing the PowerMax
1200 in this location, you are optimizing both sides of the busbar
in your panel and insuring whole facility surge protection. The
PowerMax 1200 panel system can be installed outdoors or indoors, at
the main breaker panel or a sub-panel.
For larger three phase motors, the
preferred location of the PowerMax 1200 is at the motors’
disconnect, which are installed after trained electricians have
performed an individual sizing of the respective motors. This
creates the largest savings and quickest ROI.
Qualified
electricians should perform all work.
Businesses can now dramatically reduce the cost of determining how
much capacitance is required to optimize each inductive load at
their facility. The patented apparatus and methodology, achieves
this by eliminating the typical electrical engineering, design, and
manufacturing costs. This precision technology fine tunes each motor
to unity for immediate savings with a quick ROI. Installation is
fast, simple and sized to the specific unit.
Reducing electrical waste and energy costs!
The Problem
Up to 25% of the billable electricity consumed in homes and
businesses is non-productive and unusable.
Most AC motors operate at 80%
efficiency under a full load...the efficiency drops dramatically at
lower loads.
This non-productive energy wastes money and also shortens the life
of inductive equipment such as motors, HVAC equipment, pumps and
major appliances.
“Over $16 billion dollars of electricity is
unusable energy, but billable in the U.S.”
- U.S. Dept of Energy
“The adequacy of North America’s electricity system will decline
unless changes are made soon...demand for electricity is expected to
increase over the next ten years by 19 percent in the U.S., but
confirmed power capacity will increase by only 6 percent.”
- North American
Electric Reliability Council (NERC)
The Solution
The PowerMax 1200 fine tunes electrical systems to reduce
non-productive and wasted electricity, giving you cost-effective
energy!
 The PowerMax 1200 advantages:
- Return on investment is rapid
- Power savings are immediate and
average from 8% up to 25%
- Savings guaranteed
- Reduces power surges
- Increases motor and appliance
life
- Reduces the harmful effects from
electro-magnetic fields
- 5 year warranty
- 25 year life expectancy
- U.S. Patented, NASA Tested, UL
Listed, CSA Approved
Cleaner & Greener Certified, RoHS
Certified
|
